Gefran M30 Melt Pressure Sensors, 1000 bar full scale, 6 pin
M30-6-M-B01M-4-4-0 2130X000X00
- Range
- 1000 bar full scale
- Version
- Rigid stem (standard build = model M30)
- Connector
- 6 pin
- Accuracy Class
- 0.5% FSO
- Thread
- M18 x 1.5
- Rigid Stem Length
- 153 mm / 6 in (standard for M30, M31, M32)
- Flexible Length
- None (standard for M30)
$1,310.50

Need help with M30-6-M-B01M-4-4-0 2130X000X00?
Our technical team can confirm whether F008468 fits your application, or help you find the right M3 configuration if it doesn't.
Contact SupportThe M3 series covers Gefran's mercury-filled melt pressure transducers for plastics and rubber processing equipment, where the sensor sits directly in a hot polymer melt stream rather than in a benign ambient environment. Instead of exposing strain-gauge electronics to melt temperatures directly, the M3 design carries the pressure signal through a fluid-filled capillary to a strain-gauge bridge mounted away from the hottest part of the process, which is what lets the diaphragm itself tolerate media temperatures up to 400°C while the sensing electronics stay in a much more forgiving thermal range.
One datasheet covers four build variants that share the same sensing principle and electrical interface but differ in stem geometry: M30 (fixed rigid stem), M31 (rigid stem plus a flexible capillary section), M32 (adds a type-J thermocouple alongside the pressure signal), and M33 (an exposed-capillary version for mounting configurations where a rigid probe body won't fit). All four are ordered from the same code structure and share the same core accuracy, temperature, and electrical specifications.
- ›Melt temperature rating to 400°C (750°F) at the diaphragm, via a fluid-filled hydraulic transmission system rather than direct electronic exposure to process heat
- ›Two accuracy classes to choose from: 0.25% FSO on ranges of 100 bar / 1500 psi and above, or 0.5% FSO across the full range table
- ›Eleven standard full-scale ranges from 35 bar (500 psi) up to 2000 bar (30,000 psi), selected by order code rather than by ordering a different physical sensor line
- ›Two output levels available on the same body style: 2.5 mV/V or 3.33 mV/V
- ›M32 variant adds a type-J isolated-junction thermocouple in the same probe, giving pressure and melt temperature from one installation point
- ›Choice of 6-pin or 8-pin mating connector, IP65-rated when the mating connector is fitted
- ›1/2-20 UNF or M18x1.5 process thread, independent of which stem/flexible-length variant is ordered
- ›Corrosion- and abrasion-resistant GTP+ coated diaphragm as standard; a corrugated 17-7 PH diaphragm variant is used on ranges below 100 bar / 1500 psi
| M30 / M32 | M31 | M33 (Capillary) | |
|---|---|---|---|
| Thread | 1/2-20 UNF | M18 x 1.5 | — |
| D1 | — | — | 1/2-20 UNF |
| D2 | dia 7.8 -0.05 mm [dia 0.31in -0.002] | dia 10 -0.05 mm [dia 0.394in -0.002] | .307/.305in [7.80/7.75mm] |
| D3 | dia 10.5 -0.025 mm [dia 0.41in -0.001] | dia 16 -0.08 mm [dia 0.63in -0.003] | .414/.412in [10.52/10.46mm] |
| D4 | dia 10.67 mm [dia 0.42in] | dia 16 -0.4 mm [dia 0.63in -0.016] | — |
| D5 | dia 12.7 mm [dia 0.5in] | dia 18 mm [dia 0.71in] | — |
| A | 5.56 -0.26 mm [0.22in -0.01] | 6 -0.26 mm [0.24in -0.01] | .125/.120in [3.18/3.05mm] |
| B | 11.2 mm [0.44in] | 14.8 -0.4 mm [0.58in -0.016] | .318/.312in [8.08/7.92mm] |
| C | 15.74 mm [0.62in] | 19 mm [0.75in] | .81in [20.6mm] |
| Hex (Across Flats) | 16 mm [5/8in] | 19 mm [3/4in] | — |
All dimension tables reference rigid-stem length option 4 (153mm / 6in). Torque note: max 56 Nm (500 in-lb) at installation.
Documents
Common Questions
Is Nordic Sensors an authorized Gefran distributor?
Yes — Nordic Sensors Industrial is an authorized Gefran distributor. We're also an authorized distributor for Watlow, Eurotherm, and Baumer.
How long does a quote take?
Turnaround varies by part and configuration. We keep a large local inventory of compatible components, which helps on many parts, but request a quote and our team will confirm exact timing for this specific part.
What regions do you ship to?
We ship to customers across the United States, Canada, and Mexico.
How long has Nordic Sensors been in business?
Nordic Sensors Industrial has been in business since 1996, supplying sensors, heating elements, and process equipment to industrial customers.
View all M3 Series Melt Pressure Transducers variants →
You might also need

K3 Series NaK-Filled Melt Pressure Transducers

WN Series Oil-Filled Melt Pressure Transmitters

Gefran GRD Rupture Disk

HMX Series HART Melt Pressure Transmitters

IE 'IMPACT' Series Melt Pressure Transmitters

KE Series NaK-Filled Melt Pressure Transmitters

KE Series Performance Level 'c' Melt Pressure Transmitters

KE Series SIL2 NaK-Filled Melt Pressure Transmitters

ME Series Mercury-Filled Melt Pressure Transmitters

ME Series Performance Level 'c' Melt Pressure Transmitters

ME Series SIL2 Mercury-Filled Melt Pressure Transmitters

MN Series Mercury-Filled Melt Pressure Transmitters

WE Series Performance Level 'c' Melt Pressure Transmitters

Gefran M6 Mercury-Filled Digital Melt Pressure Gauge

Gefran M5 Mercury-Filled Mechanical Melt Pressure Gauge

