ME Series Performance Level 'c' Melt Pressure Transmitters
Mercury-filled melt pressure transmitters with IEC 61508 Performance Level 'c' functional safety, self-diagnostics, and an optional excess-pressure safety relay.
The ME Performance Level 'c' series is the functional-safety-rated version of Gefran's mercury-filled melt pressure transmitter line — the same 400°C (750°F) diaphragm rating as standard ME, with continuous self-diagnostics, NAMUR NE21/NE43 breakdown-behavior compliance, and an optional safety relay for excess-pressure protection layered on top. Like ke-plc, this version uses thick-film-on-stainless-steel sensing electronics with 16-bit digital resolution rather than standard ME's analog strain-gauge bridge.

All F-Codes in This Family
Part numbers for this product are not shown online. Contact us and we'll help you find the right one.
| ME0 / ME2 | |
|---|---|
| Thread | 1/2-20 UNF |
| D2 | dia 7.8 -0.05 mm [dia 0.31in -0.002] |
| D3 | dia 10.5 -0.025 mm [dia 0.41in -0.001] |
| D4 | dia 10.67 mm [dia 0.42in] |
| D5 | dia 12.7 mm [dia 0.5in] |
| A | 5.56 -0.26 mm [0.22in -0.01] |
| B | 11.2 mm [0.44in] |
| C | 15.74 mm [0.62in] |
| Hex (Across Flats) | 16 mm [5/8in] |
42mm [1.65in] long x dia 26.5mm [dia 1.04in] — common across ME0/ME1/ME2/ME3, same figure as ke-plc's housing
All dimension tables reference rigid-stem length option 4 (153mm / 6in). Torque note: max 56 Nm (500 in-lb) at installation.
The ME Performance Level 'c' series is the functional-safety-rated version of Gefran's mercury-filled melt pressure transmitter line — the same 400°C (750°F) diaphragm rating as standard ME, with continuous self-diagnostics, NAMUR NE21/NE43 breakdown-behavior compliance, and an optional safety relay for excess-pressure protection layered on top. Like ke-plc, this version uses thick-film-on-stainless-steel sensing electronics with 16-bit digital resolution rather than standard ME's analog strain-gauge bridge.
One datasheet covers four build variants — ME0 (rigid rod), ME1 (rigid rod plus flexible), ME2 (adds a type-J thermocouple), ME3 (exposed capillary) — all folding into this single me-plc family page. The measurement range table extends one step lower than standard ME's (17 bar/250 psi floor vs. 35 bar/500 psi), the same relative widening ke-plc shows over standard KE.
- ›IEC 61508-derived Performance Level 'c' functional safety rating, documented in the order code and the datasheet's own title
- ›Continuous self-diagnostics reporting cut cable, disconnected device, broken power supply, pin detachment, overpressure beyond 200% of span, electronics over/under-voltage, program sequence error, and electronics overtemperature — each via a distinct out-of-range output current
- ›NAMUR NE21/NE43 compliant breakdown behavior
- ›Optional safety relay for excess-pressure protection: field-selectable threshold (70/80/90% FS), 1A rated carry current at 24Vdc, fail-safe open on any output fault
- ›Wider measurement range floor than standard ME — full-scale ranges from 17 bar (250 psi) up to 2000 bar (30000 psi)
- ›Diaphragm rated to 400°C (750°F) — standard 15-5 PH or 17-7 PH corrugated for lower ranges, same two-way choice as standard ME (no Inconel/Hastelloy option, unlike ke-plc's NaK-filled line)
- ›On-board magnetic Autozero, with an external-autozero wiring option available as an alternative to the CAL function
- ›Choice of 6-pin, 7-pin, or 8-pin mating connector
Need engineering support?
Our technical team can help you specify the right ME configuration for your application.
Contact SupportYou might also need

M3 Series Melt Pressure Transducers

K3 Series NaK-Filled Melt Pressure Transducers

WN Series Oil-Filled Melt Pressure Transmitters

Gefran GRD Rupture Disk

HMX Series HART Melt Pressure Transmitters

IE 'IMPACT' Series Melt Pressure Transmitters

KE Series NaK-Filled Melt Pressure Transmitters

KE Series Performance Level 'c' Melt Pressure Transmitters

KE Series SIL2 NaK-Filled Melt Pressure Transmitters

ME Series Mercury-Filled Melt Pressure Transmitters

ME Series SIL2 Mercury-Filled Melt Pressure Transmitters

MN Series Mercury-Filled Melt Pressure Transmitters

WE Series Performance Level 'c' Melt Pressure Transmitters

Gefran M6 Mercury-Filled Digital Melt Pressure Gauge

Gefran M5 Mercury-Filled Mechanical Melt Pressure Gauge

