GefonlineAuthorized Gefran Distributor
Sign InQuoteCart
Pressure Sensors · IX

Gefran IX IMPACT Fluid-Free Melt Pressure Transmitter

ATEX-approved fluid-free melt pressure transmitter with two-wire 4-20 mA output and a 350 deg C diaphragm rating.

The Gefran IX is an IMPACT melt pressure transmitter for potentially explosive atmospheres. Its piezoresistive, micro-machined silicon sensing element sits behind a thick diaphragm, so the pressure path contains no transmission fluid.

Gefran IX melt pressure transmitter with rigid stem, flexible section, and cylindrical electronics housing

All F-Codes in This Family

Measurement PrinciplePiezoresistive micro-machined silicon sensing element positioned behind a thick diaphragm
Supply Voltage10-30 Vdc
Pressure Range0-10 to 0-1000 bar; 0-150 to 0-15000 psi
Installation Max Torque40 Nm (355 in-lb) maximum tightening torque
AccuracyH: +/-0.25% FS; M: +/-0.5% FS
Atex ApprovalATEX explosive-atmosphere approval; EC-Type Examination Certificate IMQ 09 ATEX 002. The intrinsic-safety section states Ex ia IIC T6/T5/T4 Ga and Ex ia IIIC T200 temperature classes.
Functional Safety LevelNo functional safety level is stated. All eight datasheet pages were searched: no SIL2, PL c, or PL d designation was found.
Maximum Diaphragm Temperature350 °C (660 °F)
Output Signal4-20 mA, two-wire
Product TypeIMPACT melt pressure transmitter for potentially explosive atmospheres
Protection LevelIP65 with 6-pole female connector
Resolution16 bit
Response Time8 ms, 10-90% FS
Transmission FluidNo transmission fluid

Need engineering support?

Our technical team can help you specify the right IX configuration for your application.

Contact Support

You might also need