GefonlineAuthorized Gefran Distributor
Sign InQuoteCart
Pressure Sensors · M3

M3 Series Melt Pressure Transducers

Mercury-filled melt pressure sensors rated to 400°C, built for extrusion and injection molding lines.

The M3 series covers Gefran's mercury-filled melt pressure transducers for plastics and rubber processing equipment, where the sensor sits directly in a hot polymer melt stream rather than in a benign ambient environment. Instead of exposing strain-gauge electronics to melt temperatures directly, the M3 design carries the pressure signal through a fluid-filled capillary to a strain-gauge bridge mounted away from the hottest part of the process, which is what lets the diaphragm itself tolerate media temperatures up to 400°C while the sensing electronics stay in a much more forgiving thermal range.

Gefran M3 Series Melt Pressure Transducers Melt - high temperature product photo

All F-Codes in This Family

Measurement PrincipleStrain gage Wheatstone bridge
Supply Voltage6-12 Vdc (10 Vdc typical)
Bridge Resistance350 Ohm standard; 550 Ohm for ranges below 100 bar / 1500 psi
Isolation Resistance>1000 MOhm at 50 Vdc
Output (FSO)2.5 mV/V (order code 2); 3.33 mV/V (order code 3), tolerance +/-0.5% FSO
Zero Balance+/-0.5% FSO
Calibration Signal80% FSO
Compensated Temperature Range0...+100 °C (32...212 °F)
Maximum Temperature Range-30...+120 °C (-22...250 °F)
Thermal Drift (Compensated Range)<0.02% FSO/°C (<0.01% FSO/°F), combined zero/calibration/sensitivity drift
Diaphragm Maximum Temperature400 °C (750 °F)
Zero Drift vs. Process Temperature0.02 bar/°C (15 psi/100°F)
Wetted Material — DiaphragmStandard: 15-5 PH stainless steel with GTP+ coating. 17-7 PH corrugated diaphragm with GTP+ coating used for ranges below 100 bar / 1500 psi.
Wetted Material — Stem17-4 PH stainless steel
Thermocouple OptionType J, isolated junction. Standard on model M32 only.
Protection DegreeIP65, with 6-pin mating connector fitted
Electrical Connector (6-Pin)VPT07RA10-6PT (mates with PT02A-10-6P)
Electrical Connector (8-Pin)PC02E-12-8P
Mercury Fill VolumeM30: 30 mm3. M31, M32, M33: 40 mm3.
Pressure Range0-35 to 0-2000 bar (0-500 to 0-30000 psi) across the full order-code range table
Maximum Overpressure2x full scale; 1.5x full scale above 1000 bar / 15000 psi
Accuracy Class H+/-0.25% FSO, available on ranges >= 100 bar / 1500 psi
Accuracy Class M+/-0.5% FSO, available across the full range table (35-2000 bar / 500-30000 psi)
Installation Max Torque56 Nm (500 in-lb) maximum tightening torque
RoHS Scope RestrictionDirective 2011/65/EU (RoHS II) compliance is scoped to large-scale stationary installations, industrial tools, or B2B laboratory equipment for R&D purposes only.

Need engineering support?

Our technical team can help you specify the right M3 configuration for your application.

Contact Support

You might also need