Gefran KE0 Melt Pressure Sensors
KE0-6-M-P75C-1-4-0-S-E 2130X000X00
- Version
- Rigid stem (standard build = model KE0)
- Thread
- M18 x 1.5
- Rigid Stem Length
- None (standard for KE3)
$1,579.50

Need help with KE0-6-M-P75C-1-4-0-S-E 2130X000X00?
Our technical team can confirm whether F048347 fits your application, or help you find the right KE configuration if it doesn't.
Contact SupportThe KE series is Gefran's NaK-filled melt pressure transmitter line for plastics and rubber processing, built for process temperatures up to 538°C (1000°F). Where the mV/V-output K3 series requires an external amplifier or controller to interpret its signal, KE outputs a standard 4-20mA current loop directly, making it a drop-in fit for controllers that expect a transmitter rather than a raw sensor bridge.
One datasheet covers four build variants sharing the same current-loop electrical interface but differing in stem geometry: KE0 (fixed rigid stem), KE1 (rigid stem plus flexible capillary), KE2 (adds a type-J thermocouple), and KE3 (exposed capillary). All four fold into this single KE family page. This page also documents an optional Autocompensation (SP) function layered on top of any of the four base models, which corrects for pressure-reading drift caused by melt-temperature changes at the sensor's fill fluid.
- ›4-20mA 2-wire current-loop output — a direct fit for controllers expecting a transmitter signal, not a raw strain-gauge bridge
- ›On-board magnetic Autozero function: closing a magnetic contact on the housing zeroes out signal drift at zero pressure; an external autozero option is also available
- ›Optional Autocompensation (SP) function cancels pressure-reading error caused by melt-temperature variation at the fill fluid — available on ranges above 100 bar, not offered on the KE3 exposed-capillary version
- ›Diaphragm rated to 538°C (1000°F) with the Inconel 718 option; 15-5 PH (400°C/750°F) and Hastelloy C276 (300°C/570°F) also available by order code
- ›Nine standard full-scale ranges from 35 bar (500 psi) up to 1000 bar (15000 psi)
- ›KE2 variant adds a type-J isolated-junction thermocouple in the same probe body, for combined pressure and melt-temperature readings
- ›Output short-circuit and reverse-polarity protection built in
- ›Choice of 6-pin or 8-pin mating connector, IP65-rated when fitted; 1/2-20 UNF or M18x1.5 process thread
| KE0 / KE2 | KE1 | KE3 (Capillary) | |
|---|---|---|---|
| Thread | 1/2-20 UNF | M18 x 1.5 | — |
| D1 | — | — | 1/2-20 UNF |
| D2 | dia 7.8 -0.05 mm [dia 0.31in -0.002] | dia 10 -0.05 mm [dia 0.394in -0.002] | .307/.305in [7.80/7.75mm] |
| D3 | dia 10.5 -0.025 mm [dia 0.41in -0.001] | dia 16 -0.08 mm [dia 0.63in -0.003] | .414/.412in [10.52/10.46mm] |
| D4 | dia 10.67 mm [dia 0.42in] | dia 16 -0.4 mm [dia 0.63in -0.016] | — |
| D5 | dia 12.7 mm [dia 0.5in] | dia 18 mm [dia 0.71in] | — |
| A | 5.56 -0.26 mm [0.22in -0.01] | 6 -0.26 mm [0.24in -0.01] | .145/.151in [3.68/3.84mm] |
| B | 11.2 mm [0.44in] | 14.8 -0.4 mm [0.58in -0.016] | .318/.312in [8.08/7.92mm] |
| C | 15.74 mm [0.62in] | 19 mm [0.75in] | .81in [20.6mm] |
| Hex (Across Flats) | 16 mm [5/8in] | 19 mm [3/4in] | — |
All dimension tables reference rigid-stem length option 4 (153mm / 6in). Torque note: max 56 Nm (500 in-lb) at installation.
Documents
Common Questions
Is Nordic Sensors an authorized Gefran distributor?
Yes — Nordic Sensors Industrial is an authorized Gefran distributor. We're also an authorized distributor for Watlow, Eurotherm, and Baumer.
How long does a quote take?
Turnaround varies by part and configuration. We keep a large local inventory of compatible components, which helps on many parts, but request a quote and our team will confirm exact timing for this specific part.
What regions do you ship to?
We ship to customers across the United States, Canada, and Mexico.
How long has Nordic Sensors been in business?
Nordic Sensors Industrial has been in business since 1996, supplying sensors, heating elements, and process equipment to industrial customers.
View all KE Series NaK-Filled Melt Pressure Transmitters variants →
You might also need

M3 Series Melt Pressure Transducers

K3 Series NaK-Filled Melt Pressure Transducers

WN Series Oil-Filled Melt Pressure Transmitters

Gefran GRD Rupture Disk

HMX Series HART Melt Pressure Transmitters

IE 'IMPACT' Series Melt Pressure Transmitters

KE Series Performance Level 'c' Melt Pressure Transmitters

KE Series SIL2 NaK-Filled Melt Pressure Transmitters

ME Series Mercury-Filled Melt Pressure Transmitters

ME Series Performance Level 'c' Melt Pressure Transmitters

ME Series SIL2 Mercury-Filled Melt Pressure Transmitters

MN Series Mercury-Filled Melt Pressure Transmitters

WE Series Performance Level 'c' Melt Pressure Transmitters

Gefran M6 Mercury-Filled Digital Melt Pressure Gauge

Gefran M5 Mercury-Filled Mechanical Melt Pressure Gauge

