Gefran K31 Melt Pressure Sensors, 5000 psi full scale, 6 pin
K31-6-M-P05M-1-3-D-I 2130X000X00
- Range
- 5000 psi full scale
- Version
- Rigid + flexible stem (standard build = model K31)
- Connector
- 6 pin
- Accuracy Class
- 0.5% FSO
- Thread
- 1/2-20 UNF
- Rigid Stem Length
- 76 mm / 3 in (available on request)
- Flexible Stem Length
- 457 mm / 18 in (standard for K31, K32)
- Contact Diaphragm
- Inconel 718, max 538 degC (1000 degF)
$1,399.50

Need help with K31-6-M-P05M-1-3-D-I 2130X000X00?
Our technical team can confirm whether F036362 fits your application, or help you find the right K3 configuration if it doesn't.
Contact SupportThe K3 series is Gefran's highest-temperature melt pressure transducer line for plastics and rubber processing, built for process media that can reach 538°C (1000°F) — well above what the mercury-filled M3 series is rated for. Rather than exposing a strain gauge directly to that heat, the K3 design carries the pressure signal hydraulically through a sodium-potassium (NaK) fill to a bonded foil strain gauge positioned away from the hottest zone, which is what lets the diaphragm withstand extreme process temperatures while the sensing electronics run in a much more moderate range.
One datasheet covers four build variants sharing the same sensing principle and electrical interface but differing in stem geometry: K30 (fixed rigid stem), K31 (rigid stem plus a flexible capillary section), K32 (adds a type-J thermocouple), and K33 (an exposed-capillary version for tight mounting configurations). All four are ordered from the same code structure and fold into this single K3 family page.
- ›Diaphragm rated to 538°C (1000°F) media temperature when ordered with the Inconel 718 option — the highest-temperature diaphragm choice on this order code
- ›Choice of three diaphragm materials by order code: Inconel 718 (538°C/1000°F), 15-5 PH stainless (400°C/750°F), or Hastelloy C276 (300°C/570°F, restricted to pressure ranges above 700 bar/10000 psi)
- ›NaK (sodium-potassium) hydraulic fill instead of mercury — datasheet states the fill liquid is classed as a safe substance (GRAS) and conforms to the RoHS Directive
- ›Nine standard full-scale ranges from 35 bar (500 psi) up to 1000 bar (15000 psi), selected entirely by order code
- ›Two accuracy classes: 0.25% FSO on ranges of 100 bar / 1500 psi and above, or 0.5% FSO across the full range table
- ›K32 variant adds a type-J isolated-junction thermocouple in the same probe body, for combined pressure and melt-temperature readings from one port
- ›Choice of 6-pin or 8-pin mating connector, IP65-rated when the mating connector is fitted
- ›1/2-20 UNF or M18x1.5 process thread, independent of stem/flexible-length selection
| K30 / K32 | K31 | K33 (Capillary) | |
|---|---|---|---|
| Thread | 1/2-20 UNF | M18 x 1.5 | — |
| D1 | — | — | 1/2-20 UNF |
| D2 | dia 7.8 -0.05 mm [dia 0.31in -0.002] | dia 10 -0.05 mm [dia 0.394in -0.002] | .307/.305in [7.80/7.75mm] |
| D3 | dia 10.5 -0.025 mm [dia 0.41in -0.001] | dia 16 -0.08 mm [dia 0.63in -0.003] | .414/.412in [10.52/10.46mm] |
| D4 | dia 10.67 mm [dia 0.42in] | dia 16 -0.4 mm [dia 0.63in -0.016] | — |
| D5 | dia 12.7 mm [dia 0.5in] | dia 18 mm [dia 0.71in] | — |
| A | 5.56 -0.26 mm [0.22in -0.01] | 6 -0.26 mm [0.24in -0.01] | .125/.120in [3.18/3.05mm] |
| B | 11.2 mm [0.44in] | 14.8 -0.4 mm [0.58in -0.016] | .318/.312in [8.08/7.92mm] |
| C | 15.74 mm [0.62in] | 19 mm [0.75in] | .81in [20.6mm] |
| Hex (Across Flats) | 16 mm [5/8in] | 19 mm [3/4in] | — |
All dimension tables reference rigid-stem length option 4 (153mm / 6in). Torque note: max 56 Nm (500 in-lb) at installation.
Documents
Common Questions
Is Nordic Sensors an authorized Gefran distributor?
Yes — Nordic Sensors Industrial is an authorized Gefran distributor. We're also an authorized distributor for Watlow, Eurotherm, and Baumer.
How long does a quote take?
Turnaround varies by part and configuration. We keep a large local inventory of compatible components, which helps on many parts, but request a quote and our team will confirm exact timing for this specific part.
What regions do you ship to?
We ship to customers across the United States, Canada, and Mexico.
How long has Nordic Sensors been in business?
Nordic Sensors Industrial has been in business since 1996, supplying sensors, heating elements, and process equipment to industrial customers.
View all K3 Series NaK-Filled Melt Pressure Transducers variants →
You might also need

M3 Series Melt Pressure Transducers

WN Series Oil-Filled Melt Pressure Transmitters

Gefran GRD Rupture Disk

HMX Series HART Melt Pressure Transmitters

IE 'IMPACT' Series Melt Pressure Transmitters

KE Series NaK-Filled Melt Pressure Transmitters

KE Series Performance Level 'c' Melt Pressure Transmitters

KE Series SIL2 NaK-Filled Melt Pressure Transmitters

ME Series Mercury-Filled Melt Pressure Transmitters

ME Series Performance Level 'c' Melt Pressure Transmitters

ME Series SIL2 Mercury-Filled Melt Pressure Transmitters

MN Series Mercury-Filled Melt Pressure Transmitters

WE Series Performance Level 'c' Melt Pressure Transmitters

Gefran M6 Mercury-Filled Digital Melt Pressure Gauge

Gefran M5 Mercury-Filled Mechanical Melt Pressure Gauge

