WRP-S-B-0300-B-3 000031XXX00M0XX
F-Code
F080932
Contactless position sensor with a threaded AISI 316 rod and RS422-SSI digital output, 50 to 2500 mm.
The WRP-S is a magnetostrictive linear position sensor, also known as a contactless magnetostrictive linear position transducer. It is built on Gefran's HYPERWAVE magnetostrictive technology. It has an AISI 316 rod with a nipple and hexagonal flange, threaded M18 x 1.5 or 3/4 inch-16UNF. The housing closes with a removable ring nut, so the electronics and sensing element can be replaced. A floating magnet cursor, ordered separately, travels along the rod with no electrical contact, so there is no contact surface to wear out. Strokes run from 50 to 2500 mm. Output is RS422-SSI digital, in binary or Gray code, with 20 or 40 µm data resolution. It is IP67 and works from -30 to +90 °C.
F-Code
F080932
No dimension data on file yet.
The WRP-S is a magnetostrictive linear position sensor, also known as a contactless magnetostrictive linear position transducer. It is built on Gefran's HYPERWAVE magnetostrictive technology. It has an AISI 316 rod with a nipple and hexagonal flange, threaded M18 x 1.5 or 3/4 inch-16UNF. The housing closes with a removable ring nut, so the electronics and sensing element can be replaced. A floating magnet cursor, ordered separately, travels along the rod with no electrical contact, so there is no contact surface to wear out. Strokes run from 50 to 2500 mm. Output is RS422-SSI digital, in binary or Gray code, with 20 or 40 µm data resolution. It is IP67 and works from -30 to +90 °C.
It is for harsh industrial environments, with high resistance to vibration and mechanical shock, where the controller reads position directly over a Synchronous Serial Interface (SSI). It can also be mounted inside a cylinder. If your controller reads voltage or current, the WRP-A has the same rod and thread with an analog output. If you would rather have an aluminum profile, the WPP-S carries the same SSI output and takes a sliding or a floating cursor.
Our technical team can help you specify the right WRP-S configuration for your application.
Contact Support





