WPP-S-B-0250-G-4 0000XX31X00X0XX
F-Code
F085842
Contactless aluminum-profile position sensor with RS422-SSI digital output, 50 to 2500 mm.
The WPP-S is a magnetostrictive linear position sensor, also known as a contactless magnetostrictive linear position transducer. It is built on Gefran's HYPERWAVE magnetostrictive technology. The housing is an aluminum profile, fixed with steel brackets. A magnetic cursor, either sliding or a separate floating one, travels along the profile with no electrical contact, so there is no contact surface to wear out. Strokes run from 50 to 2500 mm. Output is RS422-SSI digital, in binary or Gray code, with 20 or 40 µm output data resolution. It is IP67 and works from -30 to +90 °C.
F-Code
F085842
F-Code
F079428
F-Code
F094674
No dimension data on file yet.
The WPP-S is a magnetostrictive linear position sensor, also known as a contactless magnetostrictive linear position transducer. It is built on Gefran's HYPERWAVE magnetostrictive technology. The housing is an aluminum profile, fixed with steel brackets. A magnetic cursor, either sliding or a separate floating one, travels along the profile with no electrical contact, so there is no contact surface to wear out. Strokes run from 50 to 2500 mm. Output is RS422-SSI digital, in binary or Gray code, with 20 or 40 µm output data resolution. It is IP67 and works from -30 to +90 °C.
It is for installations where the position signal goes straight to a controller over a Synchronous Serial Interface (SSI), including harsh industrial environments with vibration and mechanical shock. If your controller reads voltage or current, the WPP-A is the same profile with analog output and is rated -30 to +75 °C. If you want a threaded AISI 316 rod rather than a profile, the WRP-S carries the same SSI output.
Our technical team can help you specify the right WPP-S configuration for your application.
Contact Support





