GefonlineAuthorized Gefran Distributor
Sign InQuoteCart
Position sensors · RK5

Gefran RK5 Magnetostrictive Linear Position Sensor

Flanged contactless position sensor for oil-pressure cylinders, analog output, 50 to 2500 mm.

The RK5 is a magnetostrictive linear position sensor, also known as a contactless magnetostrictive linear position transducer. It has a flanged AISI 316 rod connection and sits completely inside an oil-pressure cylinder. A magnetic cursor travels along the rod with no electrical contact, so there is no contact surface to wear out, and a wide range of cursor configurations is available. Strokes run from 50 to 2500 mm. Output is analog.

Gefran RK5 magnetostrictive position sensor: a round metal head with two black O-rings, a long thin metal rod, a black round cursor on the rod, and green, white, brown and yellow flying leads ending in a square-flange M12 connector.

All F-Codes in This Family

ComplianceUK conformity declaration RK5-A; EU conformity declaration RK5-A; EU conformity declaration for MK/IK/ONP/RK; CE conformity to Directive 2014/30/EU.
Electrical ConnectionM12 standard Version A, M12 Version B, or free-contact flying leads
Order Code NoteOrder code: RK-5-A-<connection>-<model>-<output> <0000X><cable_length><X00X0XX>. The 0000, 00, and 0 groups are reserved positions.
Output SignalDirect analog outputs N/K/E and inverse analog outputs O/I/R, plus L for 0.25...4.5 Vdc
Power Supply10...32 Vdc for E/R current outputs; 8...32 Vdc for N/O/K/I voltage outputs
Product TypeContactless magnetostrictive linear position transducer with flanged AISI 316 rod connection and analog output
Protection LevelIP67/IP69 with connector
Resolution12 bit, minimum 50 micrometers
Shock Resistance100 g
Stroke50 to 2500 mm; order code uses four numeric model/stroke characters
Vibration ResistanceDIN IEC68T2/6, 25 g
Working PressureUp to 350 bar
Working Temperature-40 to +105 °C

Need engineering support?

Our technical team can help you specify the right RK5 configuration for your application.

Contact Support

You might also need